The pipe conveying system for the end beveling machine conveys the pipe automatically or manually when the end beveling machine works and the pipe can be removed from the machine with a turnover mechanism if necessary.
It increases the automatization level in the pipe fabricating plant and decreases the hazards during hoisting.
Specially designed conveying system for Pipe Beveling Machine; V type polyurethane roller; electric lifting and transport for beveling different diameters of pipes; VF step-less speed control, manual control on console (wireless remote control for option).
Specially designed conveying system for Pipe Beveling Machine; V type polyurethane roller, electric lifting, and transport for beveling different diameters of pipes; hydraulic scissor lift mechanism, hydraulic rotation, VF step-less speed control, manual control on console (wireless remote control for option).
Pipe Diameter Applicable: DN400/DN600/DN800/DN1000
Conveying Length: ≥500MM
Line Length: 7.5M (or depending on the situation)
Line Height: 800MM
Material of the Roller Bench: Carbon steel with a blue treated surface (coated with rubber if necessary)
Conveying Speed: 2~20M/Min
Speed Adjustment: Manual/VF step-less speed adjustment
Control System: Non-PLC control (or depending on the situation)
Turnover Mechanism: Nil (or depending on the situation)
Lifting System: A lifting system is equipped to adjust the center elevation of pipes automatically and to bevel pipes of different diameters
Turning System: A turning system is equipped to turn pipes automatically and to bevel the two ends of the pipe(option)
Used for pipeline transportation
After-Sale Service Guideline: ” Worry what users worry, think what users think ”
Within/beyond the warranty period, when the equipment gets out of order or is damaged, the company will provide technical consulting services without or with a charge. For customer advisory, the company will supply responses on the phone within 4 hours and written replies within 8 hours. If the customer requires, within 24 hours (within the distance of 800 KM) or within 48 hours (above 800 KM), the company will dispatch experienced engineering technical personnel to the customer site to analyze and guide maintenance. They will not leave until the fault is cleaned and the customer is satisfied.
